Stack it up

The Gateway Arch is about 110,000 quarter-thicknesses tall.

≈110,000 quarter-thicknesses

About 110,000 quarter-thicknesses tall — and roughly the same number across its outer base width. A dimensional comparison, not an actual stack of coins.

Calculated against a stated reference

How this measurement works

The National Park Service gives the Gateway Arch a maximum height of 630 ft. The U.S. Mint specifies a quarter at 1.75 mm thick — the same quarter reference used for six feet. Convert the height to millimetres and divide.

As wide as it is tall

The National Park Service lists 630 ft for both the Arch's maximum height and its outer width at ground level, from the outside of the north leg to the outside of the south leg. So the same ≈110,000 quarter-thicknesses would also span its base — as a dimensional comparison, not an actual line of coins.

Maximum height
630 ft (192 m)
Outer width at ground level
630 ft (192 m)

See the math

Gateway Arch height
630 ftSource value
Maximum height
In inches
630 × 12 = 7,560 inCalculated
In millimetres
7,560 × 25.4 = 192,024 mmCalculated
Quarter thickness
1.75 mmSource value
U.S. Mint specification
Quarter-thicknesses
192,024 ÷ 1.75 = 109,728Calculated
Published
≈110,000 quarter-thicknessesResult
Rounded — the comparison doesn't justify more digits

How certain is this?

Derived comparison · standardized references. The National Park Service gives the 630 ft height and the U.S. Mint specifies the 1.75 mm quarter. The division is Scaleidoscope's, rounded to about 110,000 because the comparison doesn't justify more digits.

Stacked flat, using the specified 1.75 mm coin thickness.

Sources & further reading

Follow this rabbit hole

Related reading

Keep going